SMOKE AND FIRE CURTAIN CONSTRUCTION
Only single roller construction. Each roller is up to 30 metres wide and has a minimum of 70mm diameter with a wall thickness of not less than 1.5mm. Rollers wider than 5 meters are wide single rollers incorporating IRSB headboxing. Metalwork is mild steel with a zinc coat. This product can be painted on site or powder coated to DULUX or RAL colours.
OPERATION
FireMaster S will remain retracted within its headbox until it is automatically activated by the fire alarm signal. Once activated it will completely close the opening, creating a fire and smoke compartment. The test is performed by a simple key switch. It is reset manually by pressing a reset button on the control panel. Automatic reset is available.
BOTTOM BAR
Standard bottom bar is Jumbo which is a triangular shaped bar 40mm wide. Also available is the ‘T’ bar and operable ceiling interface systems (SLAT) in 150mm and 75mm profiles.
SMOKE RATING
The complete product tested to AS1530.7 (2007). Standard Reference Conditions (STP) @ 200°C and 25Pa after exposure for 30 minutes. Assessment report EXOVA BWA-RIR-22525. 
Benefits
- Provides both fire separation and smoke containment
- Small lightweight head boxing
- Can fire protect very large open spaces without the need to heavy structural supports
- Can easily retrofit into heritage buildings
- Is true Fail-Safe by gravity which means it will work when required
Learn More
For Further Reference please read the documents provided below. If you wish to obtain further information regarding our Fire and Smoke protection, please contact us at (02) 9526 3100, or email us at sales@greenefire.com.au. Alternatively, you can speak to us in person at Greene fire Pty Limited, find your local office here.